 |
The Multitron II Incubator Shaker has a large capacity and may be stacked up to 3 high, freeing up floor space. The
ingenious design of the Infors shakers features a front-loading pullout platform, stainless steel interior panels, panoramic front window and
inspection light. The patented drive system provides uniform motion and quiet operation without vibration. The sealed cabinet ensures fast and
accurate heating. Refrigeration, humidity and CO2 control are available, as well as a variety of lighting options.
All cabinets incorporate an independent control and power system, with redundant control of speed, temperature, lights, humidity and CO2.
This new feature allows existing cabinets to be easily upgraded to a stacked system that saves valuable floor space.
|
| Each unit has a control panel with a splash proof keypad and LED display. The comfortable working height allows easy access to
set points, on/off control and program cycles (day / night simulations). The display alternates between the current values of temperature
and speed while the unit is operating. Microprocessor technology and PID control guarantee precise regulation and accuracy at set values.
The fully insulated incubation chamber reduces heat transfer into and out of the cabinet. This, coupled with the use of efficient high
velocity blowers ensures accurate temperature control and minimal temperature variations over the surface of the platform.Cooling can be fitted on any unit in a single or stacked system. Top mounted chilled water, side mounted direct refrigeration or
rear mounted thermoelectric (Peltier) cooling can be specified depending on space limitations, ambient temperature and end temperature requirements.
Growth lighting, CO2, and humidity, as options, can be installed in any cabinet location. Growth lighting requires the addition of
top or side cooling for stable temperature control.
The Multitron II can have a 3mm, 25mm, or 50mm diameter orbit (or throw) to optimize the oxygen transfer rate for different sized flasks or
microtiter plates. Speed control ranges between 20 and 400 rpm (50-1000 rpm for 3mm Multitron II Micro). Cabinet location (top, middle, or bottom),
throw, and the volume of flasks determine maximum speed.
A work light is provided in the cabinet. Activated by pressing any key on the front panel, this allows you to see the contents of the shaker
through the panoramic front window without opening the door.
The machine will pause when the door is opened and will resume operation when the door is closed (or following a power failure).
When the door is opened during operation, it is prevented from opening fully. A brake is applied to the shaker drive and the circulation
fans are switched off . Once the table has stopped moving, the door can be fully opened and the platform is released for removal.
All measurements can be logged or used for external control via a RS232 serial link to a computer. Alarm modes are also available for
external monitoring.
The interior cabinet base is formed to be a water tight tray for complete containment of spills, and comes equipped with a drain fitting for easy
collection of liquids. The drive motor is located outside of the environmental cabinet for reliability and safety.
|
 |
Please feel free to contact us by phone, fax or email with any questions, comments or ideas you have.
Telephone: 800-827-5931 | Outside the US please call 301-470-1267 or 410-792-0769 | Fax: 410-792-2837 | Postal Address: PO Box 460 Laurel, MD 20725
| Fax: 410-792-2837
|
|
